Stud for the PTO selector pivotPart no: 506204Used on the PTO selector mechanism that protrudes through the heel board from October 1960 to early 1970's. Also used on the Bottom PTO selector mechanism. High quality item, an exact copy of the original stud. Phosphate finish. ..
Rear Power Take Off Gasket set.Corresponds to part no: 217660, 217662, 217664Please note: the gaskets fit Series 1, Series 2 & 2a rear PTO's but will not fit the Series 3 type which has the modified gearing...
M8 Rivnut for securing the winch base plate, driveshaft & winch support brackets to chassis. Part no: FWL-4-60-084003. 268703_METRIC. 501224_METRIC) Supersedes 5/16" UNF (501224) & 5/16" BSF (268703) rivnut.11mm drill bit required for fitting. &n..
Dust cover for Aeroparts capstan winch driveshaft, Series 1 clutch crossshaft and Bottom PTO selector shaft. Part no: 263977, 219080. Manufactured in the UK from hard wearing and chemical resistant rubber. Reinforced with extra material around the smaller end to provide a better secu..
Screw countersunk slotted 2BA x 1/2" . Part no: 77784 Finish: SherardizedCan be used as a replacment for 78949 if 2BA nuts are used instead of 10-32UNF..