'O' Ring. Corresponds to part no: 267828Various applications including inlet & outlet adaptor hydraulic pump and 1600, 2l & 2.6l petrol rocker side cover bolt sealing washer...
Highly accurate reproduction of the exceptionally effective Fairey ground anchors. Part no: 583590Sold in pairs. Galvanised finish. Fold flat when not in use. Serrated edge of spade to be used in soft ground and with the spade reversed to the straight edge they can be used effective..
Grease nipple. Corresponds to part no: 234532Applications include Land Rover mk1 / mk2 Hydraulic Winch drum (2 required per winch) & propshaft sleeve...
Hydraulic oil tank to rear crossmember mounting bracket for Land Rover Series 2 2a 3 109" long wheel base. Corresponds to part no: 580109Powder-coated finish..
Hydraulic oil tank to rear crossmember mounting bracket for Land Rover Series 2 2a 3 88' short wheel base. Corresponds to part no: 580070Powder-coated finish..
Hydraulic pump to PTO adaptor gasket. Also used on the Land Rover mk1/mk2 & Aeroparts GLR104 hydraulic winch to fit the motor to the winch gearbox.Corresponds to part no: 580007Supersedes to part no: RTC7204 Please note: Does not fit the hydraulic PTO originally supplied with early La..
Land Rover mk1 / mk2 Hydraulic Winch gasket setCorresponds to part no: 580004, 580007, 580046 (x2)Please note for mk2 winches only one of the 580046 gaskets are used...
Land Rover mk1 Hydraulic winch bearing support bracket. Part no: 580022Copied from a genuine example and reinforced around the selector lever area.Includes bearingPlease note: although this looks similar to the mk2 version, this will only fit the mk1 version with the early roller typ..
Land Rover mk1 hydraulic winch, PTO pump to spool valve. Part no: 580104Not suitable for the Land Rover mk2 winch. Will only fit the mk1 version of the winch with the type of control valve and PTO pump shown in the 2nd picture. If you are unsure, please get in touch. Manufactu..
Land Rover mk1 hydraulic winch, spool valve to motor, hose. Part no: 580090Not suitable for the Land Rover mk2 winch. Will only fit the mk1 version of the winch with the type of control valve, motor shown in the 2nd picture. If you are unsure, please get in touch. Manufactured..
Land Rover mk1 hydraulic winch, spool valve to motor, hose. Part no: 580091Not suitable for the Land Rover mk2 winch. Will only fit the mk1 version of the winch with the type of control valve, motor shown in the 2nd picture. If you are unsure, please get in touch. Manufactured..
Land Rover Mk1 Hydraulic Winch Wormshaft Oil Seal for 'late' Mk1 winches.Corresponds to part no: 537852Fits 'late' mk1 winches with brake band. 'Early' Mk1 winches do not have an oil seal. Not required on mk2 winches...
Land Rover mk2 Hydraulic Winch Mounting U-Bolts.Corresponds to part no: 580021-LONGManufactured from High-tensile steel & BZP finish.Sold in packs of 2, includes nuts and spring-washers.PLEASE NOTE: These U-bolts are for the 'later' Land Rover Series 3 type mounting bracket which require the lon..
Land Rover mk2 hydraulic winch, PTO pump to spool valve hose. Part no: 552922Not suitable for the Land Rover mk1 winch. Will only fit the mk2 version of the winch with the type of control valve, and hydraulic PTO pump shown in the 2nd picture. If you are unsure, please get in touch...